Showing posts with label disassembly. Show all posts
Showing posts with label disassembly. Show all posts

Thursday, January 1, 2009

Eureka! I Got You, Sucka!!

What an excellent way to start the new year! It only took about fifteen minutes and the motor was on the floor. I had to do a little wiggling and shimmying to get it out (it probably would've been easier if I had taken off the exhaust flanges first), but with a little effort, it was quite willing to come right out.

I've still got the weekend ahead of me, before heading back into work. I'm thinking of just stripping the rest of the bike now, since I'm kind of ahead of schedule...

Wednesday, December 31, 2008

Motor's Almost Out

Today, I made huge gains in getting that motor on my bench. I was still having trouble figuring out how to detach the wires from the generator. So I decided to empty out more of the frame, pulling out the oil reservoir, battery box and lower half of the air box. That left most of the electrical harness and components exposed and easy to see.

A long time ago, I was having some weird electrical issues, so I took my bike to this shop, where the owner went by the name Grumpy Bear. He told me that he had to do some creative wiring, but that old bike fired right up and I never had electrical problems again, so he must've know what he was doing. But now that I'm in there really examining things, I noticed that he by-passed the customary plastic connectors and just hard-wired the motor to the electrical harness. Umm...okay...so it worked, but that's not really the way to do things, and it's really not cool. So after cleaning the wires, so I could actually see what colors they were, I labeled them and then cut them. I might need to know this stuff for later reference. But if I end up going with a new ignition that eliminates the battery, it will have it's own wiring. And I do happen to have a electrical harness in very good shape I just recently purchased, so the labeling might not even matter.


I was then able to remove the generator. In order to take the generator out, I had to remove the engine clutch cover, so I could stop the center bolt from spinning, during the removal process. Surprisingly, the clutch was in very good shape- all nice and clean. Matter of fact, when I drained the oil from the engine, there was still about two quarts of oil in the case! I just thought that after leaking all over my parent's garage floor, there would be no motor oil left in there. I finished the night but locating and loosening all the motor mount bolts, readying them for the next day.

Monday, December 29, 2008

Carbs Done with their Cleaning

Today I had a glimpse into the future. This is how I picture my retirement- sitting at the breakfast table scrubbing vintage motorcycle parts, while cooking shows on the Food Network play in the background. What more could I want?

Finally I'm done with all the scrubbing and polishing. I would say that each carburetor took about six hours of labor. The carbs look good as new!

It was a task that obviously had to get done, not only for the sake of their ungodly appearances, but to clean out all that crap that's been sitting on the insides for the past ten plus years. The last time I ever tinkered with them, I had close to no mechanical experience with motorcycles, so when I had jetting problems, I turned to the "professionals", taking the bike to small two-stroke shops. Well, I found all sorts of little parts missing like washers and a spring.

Lots of parts needed attention. The slide in the left carb was frozen in place- gunk had solidified and glued it into place. Both needle jets needed to get popped out- there was so much corrosion and grit in the emulsion tubes- the jets are wasted. The air jets were caked with solid gunk, like barnacles on to a rock. The corrosion was so bad in the left carb float assembly that it had eaten away a good portion of the main jet support. I'm ordering new o-rings and gaskets as well as a spring for both carburetors.

Here are some before and after pictures of the carbs. My method of cleaning them 1) soak and scrub them in a cocktail of kerosene and carb cleaner 2) scrub them with Barkeepers Friend then 3) polish the parts with Never-Dull. Hence six hours per carb.


Saturday, December 20, 2008

Got Sidetracked

For some reason, I just felt like working on the carbs today. I pulled both carbs out of the holding box and examined them closely. Maybe it was the simple challenge of getting them to look new again, but I was so inclined to just begin working on those before yanking the motor. It was certainly a shorter and easier goal to achieve- the satisfaction of success was just days away, rather than months away. So I grabbed the right carb, since I knew it wasn't stuck, plus it was the simpler of the two, since there was no choke assembly to mess with. The arduous process began.

Sunday, December 14, 2008

Only the Beginning

For some crazy reason, today I decided to start dismantling the motorcycle. I just passed a major milestone in my network professional career, passing my first Cisco certification test. I guess I was just feeling like a little reward was appropriate and this is what I came up with. After all, I've been waiting forever for the chance to really start the restoration. Last year, I started taking the front brake system apart (master cylinder and brake line), but I never even got around to rebuilding it, so that doesn't really count.

I cleared some space in the garage, kicking the SUV out into the wet and cold weather, and got some cardboard in place. Funny, but that fancy motorcycle stand I bought, that's supposed to work with all types of bikes, didn't really want to work with this bike. First, I couldn't get the brackets to move in close enough to support the swingarm. I flipped the brackets around and got them to kind of work- good enough for now. The rear tire wasn't even off the ground, but that's okay for today. And away I went.

My initial goal is to try and get the new motor built in the Spring. I've emailed an old Yamaha mechanic who lives in Castro Valley about doing some work and he's agree. I met him some six or seven years ago, buying parts off of Ebay. He was one of the sellers. I was living in Castro Valley at the time, so I just did a local pick up. He is continuously building RD's and seems to have a neverending supply of old parts. He mostly refurbishes the old parts and hawks them on Ebay. I will probably do most of the engine build myself, including rebuilding (and possibly welding) the crank. But porting is a mystery to me. He has agreed to do the cylinder porting, boring and honing. So I first need to get the motor out of the old frame, so I can tear it down to see what it needs, i.e. piston sizes.

I removed the gas tank, carburetors, most of the airbox, battery and engine covers. Man! what a mess!! The front counter sprocket was so loose that I was able to break it loose with my fingers! Usually you'd need a big socket (28 or 32mm) and a breaker bar to get that sucker off. I pried off the masterlink on the chain and removed that dirty stinking chain. I then was able to remove the counter sprocket and flat washer from the shaft.

That was all for now. Although I didn't get the motor out yet, I was off to a really good start! When the engine is on my bench, I can move the bike back to it's cubby-hole and move the truck back in the garage. I've got another bottom end of an RD400 motor I need to inspect and get refamiliarized with. (I purchased it off of Ebay about five years ago.) It came with a fresh transmission and clutch assembly. So I can actually sell my old engine case and recoup some cash back.